- Features
- Highlights
- Quality control
- Warranty
Cabinet material technology
* The frame is made of high quality steel, electrostatic spray, and the cabinet is cast with aluminum alloy, with more stable thermal insulation performance.
* Two large capacity steel storage cabinets, bearing capacity up to 6kg.
* Crib tilt Angle stepless adjustable function, adjusted to ±10° stepless adjustment, adjustable before and after.
* Detachable baby mattress, mattress coat is made of pure cotton material, care for baby's delicate skin, mattress with 3cm high density sponge, environmental protection, no odor, good air permeability, good resilience, long-term use without deformation.
* Pull type storage tank, water level scale clear, storage tank must be added distilled water (or sterile water), and daily empty replacement.
* It is used to extend the wiring tube or connecting line of infusion tube, monitor probe line, breathing mask, phototherapy blanket and other equipment from the outside to the inside of the infant incubator.
* When the baby needs nursing, in order to avoid opening the thermostat cover, the baby can be cold, both hands can be extended into the operating window for operation.
* The use of high quality acrylic plate thermostatic cover, protect the stability and uniformity of temperature and humidity in the baby cabin, and facilitate the cleaning and disinfection of medical staff.
* Stainless steel infusion stand with maximum load of 2kg.
* 3 "medical mute casters, 2 wheels with foot brake.
* Surrounded by the box anti-collision strip design, can easily move the box, but also can protect the incubator, to prevent the collision of the crib in the movement.
* LCD split screen display, you can set the temperature and box temperature.
* Set box temperature/humidity/oxygen concentration sensor in one; Independent skin temperature sensor is easy to remove, convenient for medical staff cleaning and disinfection.
Control section
* It has two temperature control modes: box temperature and skin temperature.
* With humidity control function.
* The product has boot - on self - check function, a variety of fault alarm prompts.
* >37℃ preset mode: power reset memory, alarm mute, keyboard lock, self-check.
* With the main door independent locking device.
*Equipped with RS-232 interface, easy to connect different devices.
Technical parameters
* The frame is made of high quality steel, electrostatic spray, and the cabinet is cast with aluminum alloy, with more stable thermal insulation performance.
* Two large capacity steel storage cabinets, bearing capacity up to 6kg.
* Crib tilt Angle stepless adjustable function, adjusted to ±10° stepless adjustment, adjustable before and after.
* Detachable baby mattress, mattress coat is made of pure cotton material, care for baby's delicate skin, mattress with 3cm high density sponge, environmental protection, no odor, good air permeability, good resilience, long-term use without deformation.
* Pull type storage tank, water level scale clear, storage tank must be added distilled water (or sterile water), and daily empty replacement.
* It is used to extend the wiring tube or connecting line of infusion tube, monitor probe line, breathing mask, phototherapy blanket and other equipment from the outside to the inside of the infant incubator.
* When the baby needs nursing, in order to avoid opening the thermostat cover, the baby can be cold, both hands can be extended into the operating window for operation.
* The use of high quality acrylic plate thermostatic cover, protect the stability and uniformity of temperature and humidity in the baby cabin, and facilitate the cleaning and disinfection of medical staff.
* Stainless steel infusion stand with maximum load of 2kg.
* 3 "medical mute casters, 2 wheels with foot brake.
* Surrounded by the box anti-collision strip design, can easily move the box, but also can protect the incubator, to prevent the collision of the crib in the movement.
* LCD split screen display, you can set the temperature and box temperature.
* Set box temperature/humidity/oxygen concentration sensor in one; Independent skin temperature sensor is easy to remove, convenient for medical staff cleaning and disinfection.
Control section
* It has two temperature control modes: box temperature and skin temperature.
* With humidity control function.
* The product has boot - on self - check function, a variety of fault alarm prompts.
* >37℃ preset mode: power reset memory, alarm mute, keyboard lock, self-check.
* With the main door independent locking device.
*Equipped with RS-232 interface, easy to connect different devices.
Technical parameters
| Mattress to thermostat height | 450 mm |
| Front side door panel | 826×310 mm |
| Mattress tray size | 630×360 mm |
| Crib tilt adjustment | ±10° stepless |
| Power supply | AC 220V，50Hz |
| Power requirement | ≤400VA |
| Temperature control mode | Air and skin servo control |
| Air temperature control range | 20.0°C-37.0°C |
| Temperature overcontrol mode to | 37.1°C-39.0°C |
| Temperature control range | 20.0°C-37.0°C |
| Temperature overcontrol mode to | 37.1°C-38.0°C |
| Accuracy of temperature sensor | ≤0.3°C |
| Display range | 5%-99% |
| Temperature fluctuation | ≤0.5°C |
| Thermostat noise level | ≤55dB |
| Ambient temperature | +20°C-+30°C |
| Ambient relative humidity | 30%-75% |
| Maximum load-bearing capacity of infusion stand | 2KG |
| Maximum load-bearing capacity of the hanging cabinet | 6KG |
- Related products
